Floors worth looking down at, Stantonsburg.
Resin floors and countertops around Stantonsburg, poured by the owner, Beto Ponce. Insured and bonded, with metallic work as the specialty.
Insured and bonded · 5 years · every floor poured by the owner
Get a free quote
Photos and rough square footage get you a real number.
Resin floors for Stantonsburg homes.
Stantonsburg calls usually start the same way: the slab is dusting, there is a stain that will not come up, and somebody is tired of looking at it.
We run out to Stantonsburg from the shop in Goldsboro, about 35 minutes out. Stantonsburg is in Wilson County, and we cover the towns around it too, including Wilson, Black Creek, Lucama, Saratoga.
Most garage floors in Stantonsburg were poured, troweled, and never touched again. That slab has been soaking up whatever landed on it ever since.
We own the grinders outright. Renting by the day puts a clock on the most important step, and the grind is the step that decides how long the floor lasts. So it goes the same way on every job: diamond grind to open concrete, chase and fill whatever cracks appear, then pour and topcoat. No shortcuts in the first half.
The ground under a slab in Stantonsburg.
This is coastal plain country. Sandy soil, a water table that rises and falls through the year, and eight months of genuine humidity. Slabs poured on that ground move a little, and the fine cracking that comes with it is normal rather than alarming. What matters is catching it during the grind instead of coating over it.
The age of the house matters here. Plenty of homes in this area were built before anyone routinely put a vapor barrier under the slab, so moisture has been coming up through those floors every day since. Seal that in under a coating and it will lift. We test every slab for it before we price the job.
A metallic pattern is set while the resin is still wet, and heat cuts that time short. That is why an August pour in a garage without insulation does not come out like an October one unless you adjust for it. Five years of pouring in this weather is where that knowledge comes from.
What we pour in Stantonsburg
Recent pours
Which rooms we end up in.
The rooms change but the problem does not. Bare concrete is porous, it stains, it dusts, and sealing it after the fact with something off a shelf almost never holds.
Countertops are the other side of the business. The resin pours over the counters that are already there, so a kitchen in Stantonsburg changes completely without a tear-out, without new cabinets, and without a week of plywood while a slab gets templated. See how countertop pours work.
Timing a pour around the weather.
We pour most of the year. What moves a date is slab temperature, not the calendar, so a mild January week is often better than a brutal July afternoon.
What moves the price.
A phone price would not mean much. What is under the old coating changes the job, and you only find that out standing on the slab. Size alone tells us very little.
Surprises in the middle of a job are what people dread, so we do the looking up front. We test the slab and hand you a number that same day, and that number holds after the work starts. A few photos and the square footage are enough for us to tell you if you are in the right range.
How the two days run.
You usually do not know what the slab is hiding until the grinder opens it up. That is the first day: grind the floor down to clean concrete with the extractor pulling dust at the tool, then chase out and fill every crack and pit the grind exposes. It is the loud, slow half of the job. The pour and topcoat come the next day and go fast.
The one thing we will push back on is driving onto the floor too soon. It can take foot traffic the morning after, but a vehicle needs day three or four, depending on the warmth, or it leaves marks in a finish that is still curing. On the first morning we also need the room cleared, because the whole slab gets ground.
Who actually pours it.
Alpha Resin is a small shop on purpose. Fewer floors, poured by the person whose name is on the truck.
Insured and bonded, 5 years of pours, and a phone the owner answers. See the gallery, read about the rest of Wilson County, or send photos of the slab.
Coverage questions are a quick phone call. Stantonsburg is inside our area, which runs across 10 counties out of Goldsboro and about 60 miles in any direction. Addresses out on the edge are usually fine too, since a town or county boundary does not tell you much about the actual drive. Ask before you count yourself out.
Questions from Stantonsburg customers
Is there a warranty?
Yes, and it is worth reading rather than framing. Ask when we quote and we will tell you plainly what it covers and what it does not.
How far out are you booking?
It moves with the season. Spring and fall fill first. Call and we will tell you honestly where you would land rather than telling you what you want to hear.
What if I already have a coating that is failing?
That is a normal starting point. It comes off in the grind, and what is underneath decides what the job actually is. We would rather find that on day one than after.
Do I have to coat it after grinding?
Not at all. Grind and seal is a finish people choose on purpose, especially for a shop or a slab whose look they already like. Concrete sealing is a separate service with us, and plenty of jobs stop there.
Will grinding get rid of the oil stains?
It depends how deep the oil went. Surface stains come off with the top layer when we grind. Oil that has soaked well into the slab can show up again later, which is why those floors get degreased and sometimes primed.
Got a slab in Stantonsburg?
Send a couple of photos and the rough square footage. We will tell you what it takes.
Beto Ponce picks up when you call. If you want to see his floors first, the gallery has plenty.
(919) 440-1333