Floors worth looking down at, Mount Olive.
Homes around Mount Olive get the owner on every job. Metallic, flake and quartz floors, ground to clean concrete first. Insured and bonded.
Insured and bonded · 5 years · every floor poured by the owner
Get a free quote
Photos and rough square footage get you a real number.
Resin floors for Mount Olive homes.
The concrete around Mount Olive is no different from anywhere else in the county. What differs is how long it has been left open to whatever lands on it.
We are based in Goldsboro, so Mount Olive is a short haul with the trailer. Mount Olive is in Wayne County, and we cover the towns around it too, including Goldsboro, Dudley, Pikeville, Fremont.
The difference between a coating that lasts nine years and one that peels in nine months is almost never the resin. It is what happened to the concrete before the resin went down.
The sequence is the same on every floor. Diamond grind the slab down to clean, open concrete. Chase and fill the cracks the grind exposes. Pour, then topcoat. The grind is the part that decides whether the floor is still holding in ten years, which is why we own the equipment rather than renting it by the day.
Why slabs around here fail early.
People who call us about a floor that failed usually assume the coating was bad. Most of the time it was fine. What failed was the prep: the slab was already moving on its sandy base and opening hairline cracks, and nobody dealt with them before the coating went down, so within a year those lines came right through.
Repair work is most of what separates a floor that lasts from one that cracks through. We chase each crack into a V and fill it with a rigid repair resin, patch the pits and grind them level, and treat the control joints so they can keep moving under the finish. None of it is visible once the coating is down.
Heat matters as much as the ground does. Resin cures by chemical reaction, and a hot Mount Olive garage in July shortens the working window enough to change how a metallic pour is handled. We schedule around the slab temperature rather than the calendar.
What we pour in Mount Olive
Recent pours
Which rooms we end up in.
Most calls start in the garage, but a good share end up somewhere else in the house. Once people see what a resin floor does to a bay they start looking at the laundry room, the sunroom, the basement steps.
Your old counters become the base. We prep them and pour resin over the top, which means your Mount Olive kitchen gets a new surface without demolition and without a week of waiting on cut stone. Countertop work is a steady part of what we do. More on countertop pours.
Timing a pour around the weather.
The busy stretch runs from about March through June and then again in September and October. If you want a specific week, calling a month out is the difference between getting it and waiting.
What moves the price.
Price tracks the prep, not the resin. The material cost between a simple flake floor and a showpiece metallic pour is real but modest; the hours in the grind and the repair are what change the total.
Photos are a good place to start. Send a couple along with the rough size, and we can tell you whether your project lands in the range you have in mind before anybody makes a trip. After that we come out, walk the slab, and give you a number that same day. It stays put once we begin.
How the two days run.
If you look in at the end of the first day, there is no color on the floor yet. That is normal. Day one is all grinding, taking the slab down to clean concrete and filling the cracks and pits the grind turns up, and it is the dusty, loud part of the job. Color and topcoat happen on day two, and that part goes quickly.
Plan on the car living in the driveway for a few days. Walking on the floor is fine the morning after the pour, but vehicles wait until day three or four, and warmer weather is what gets you the earlier end of that. Before we start, the room needs to be cleared out completely, since the grinder goes over the entire slab.
Who actually pours it.
Every floor Alpha Resin puts down gets poured by the owner. There is no crew that shows up instead of the person you talked to.
Insured and bonded, 5 years of pours, and a phone the owner answers. See the gallery, read about the rest of Wayne County, or send photos of the slab.
Alpha Resin works a 60-mile radius around Goldsboro, and Mount Olive is inside it. If your address is out past the edge of town, do not rule yourself out. A county line on a map says very little about how far the trailer drives, so give us a call and ask. Most of the time we can get there.
Questions from Mount Olive customers
Can you match a color I have seen?
Close, and usually closer than people expect. Bring a photo. Metallic pigment moves on its own while it cures, so the floor reads as that look rather than copying it exactly.
How much dust does the grinding make?
Less than people picture. The grinder runs into a dust extractor at the tool, so it is captured where it is made. It is not zero, and we sheet off doorways, but it does not fill the house.
Do you take on small jobs?
Yes. A single-bay garage, a laundry room, a set of counters. Small work is a good share of the schedule and it is how most people try us before a bigger job.
Is there a warranty?
Yes, and it is worth reading rather than framing. Ask when we quote and we will tell you plainly what it covers and what it does not.
How far out are you booking?
It moves with the season. Spring and fall fill first. Call and we will tell you honestly where you would land rather than telling you what you want to hear.
Got a slab in Mount Olive?
Snap a few photos of the floor and take a guess at the square footage. That is enough for us to tell you what you are looking at.
Questions go to Beto Ponce directly, with no answering service in between. Want to see his work? Start with the gallery.
(919) 440-1333