Floors worth looking down at, Lucama.
Resin floors and countertops around Lucama, poured by the owner, Beto Ponce. Insured and bonded, with metallic work as the specialty.
Insured and bonded · 5 years · every floor poured by the owner
Get a free quote
Photos and rough square footage get you a real number.
Resin floors for Lucama homes.
Most of the garages we coat around Lucama were poured with the house and never touched since.
We run out to Lucama from the shop in Goldsboro, about 35 minutes out. Lucama is in Wilson County, and we cover the towns around it too, including Wilson, Black Creek, Stantonsburg, Saratoga.
Concrete is porous. It drinks oil, it dusts under tires, and once a stain is in there it stays. A resin floor closes the slab off for good.
We own the grinders outright. Renting by the day puts a clock on the most important step, and the grind is the step that decides how long the floor lasts. So it goes the same way on every job: diamond grind to open concrete, chase and fill whatever cracks appear, then pour and topcoat. No shortcuts in the first half.
Why slabs around here fail early.
Sandy ground does not hold still. It shifts through the year, and the slab on top of it moves with it, which slowly opens the hairline cracks that are already there. Coat over those without treating them and every crack reappears in the finish, usually inside a year. When we get called out to a failed floor, that is usually what we find, and the resin had little to do with it.
Pits and cracks get dealt with one at a time. Every pit is patched and then ground back down so it sits flat with the rest of the slab. Every crack is cut out into a V and packed with rigid repair resin. Control joints are treated so they still flex without splitting the coating. It is slow, plain work, and the floor depends on it.
The slab temperature drives our schedule more than the calendar does. In a hot Lucama garage in July, the chemical reaction that cures resin speeds up and the working window shrinks, which changes how a metallic pour has to be handled. The ground is only half of it.
What we pour in Lucama
Recent pours
Which rooms we end up in.
The garage is usually the first job, but it often is not the last. After seeing the bay done, people start asking about the laundry room or the sunroom, and sometimes the basement steps.
Plenty of people who call about a garage end up asking about the kitchen. Countertops are the other side of the business: resin goes over your current counters, so your Lucama kitchen looks brand new while the cabinets and plumbing stay exactly where they are. You can read how we pour countertops before you call.
Timing a pour around the weather.
The busy stretch runs from about March through June and then again in September and October. If you want a specific week, calling a month out is the difference between getting it and waiting.
What moves the price.
Price tracks the prep, not the resin. The material cost between a simple flake floor and a showpiece metallic pour is real but modest; the hours in the grind and the repair are what change the total.
Once we start, the number does not change. We set it the day we walk the slab, after we have seen the cracks and the old coating in person. Want a gut check before anyone drives out? Send a few photos and we will tell you whether you are in the right range.
How the two days run.
You usually do not know what the slab is hiding until the grinder opens it up. That is the first day: grind the floor down to clean concrete with the extractor pulling dust at the tool, then chase out and fill every crack and pit the grind exposes. It is the loud, slow half of the job. The pour and topcoat come the next day and go fast.
Everything has to come off the floor before we get there, shelving and all. The grinder covers the whole slab edge to edge, so an empty room on the first morning is the one thing we ask for. After the topcoat you can walk on it the next day. Driving on it waits until day three or four.
Who actually pours it.
Every floor Alpha Resin puts down gets poured by the owner. There is no crew that shows up instead of the person you talked to.
Insured and bonded, 5 years of pours, and a phone the owner answers. See the gallery, read about the rest of Wilson County, or send photos of the slab.
If you are on the edge of town or just outside it, call and ask rather than assuming. Town lines and county lines rarely match how far a trailer actually has to drive, and the answer is usually yes. Alpha Resin covers 10 counties out of Goldsboro, and Lucama sits well inside that.
Questions from Lucama customers
How far out are you booking?
It moves with the season. Spring and fall fill first. Call and we will tell you honestly where you would land rather than telling you what you want to hear.
What if I already have a coating that is failing?
That is a normal starting point. It comes off in the grind, and what is underneath decides what the job actually is. We would rather find that on day one than after.
Do I have to coat it after grinding?
No. Grinding stands on its own as a service. Plenty of shop floors and plain slabs get ground, sealed and left that way, and if you like the look of bare concrete there is no reason to put color over it.
Will grinding get rid of the oil stains?
It removes the stained surface layer, which handles most of it. Oil that has soaked deep into the slab can ghost back, so heavy contamination gets a degreasing pass first and sometimes a primer.
How much dust does it make?
Far less than people expect. The grinder runs into a dust extractor at the tool, so the dust is captured where it is made rather than filling the house. It is not zero, but it is not the fog people picture either.
Got a slab in Lucama?
A couple of pictures and a rough size is all it takes to start. We will tell you what the slab needs.
Beto Ponce picks up when you call. If you want to see his floors first, the gallery has plenty.
(919) 440-1333