Floors worth looking down at, Bailey.
Homes around Bailey get the owner on every job. Metallic, flake and quartz floors, ground to clean concrete first. Insured and bonded.
Insured and bonded · 5 years · every floor poured by the owner
Get a free quote
Photos and rough square footage get you a real number.
Resin floors for Bailey homes.
Most of the garages we coat around Bailey were poured with the house and never touched since.
We run out to Bailey from the shop in Goldsboro, about 50 minutes out. Bailey is in Nash County, and we cover the towns around it too, including Rocky Mount, Nashville, Middlesex, Spring Hope.
Concrete is porous. It drinks oil, it dusts under tires, and once a stain is in there it stays. A resin floor closes the slab off for good.
A floor that is still tight in ten years got that way on the first day. That is the grind: diamond tooling takes the slab down to clean, open concrete so the resin has something to bite into, and any cracks it uncovers get chased out and filled. The pour and topcoat follow, and they are the easy part.
The ground under a slab in Bailey.
Hairline cracks in a slab around here are normal. The ground is sandy coastal plain with a water table that comes up and drops back through the year, so concrete poured on it shifts a little over time. Those fine cracks are nothing to panic about. They just need to be found and filled during the grind so they never get coated over.
Cracks get the attention, but vapor is the bigger problem under these floors. A good share of the older slabs went down without a vapor barrier, so water from below keeps rising into the concrete day after day. Trapped under a sealed coating, it pushes the coating up. So the slab gets tested before anything else happens.
Five years of pouring in this climate teaches you how heat changes resin. The same metallic floor behaves one way in an uninsulated garage in August and another way in October, and the difference shows up right in the pattern. Knowing which one you are walking into is a big part of the job.
What we pour in Bailey
Recent pours
Which rooms we end up in.
The rooms change but the problem does not. Bare concrete is porous, it stains, it dusts, and sealing it after the fact with something off a shelf almost never holds.
Replacing counters the usual way means waiting on a templated slab and living with plywood in the meantime. A resin countertop skips all of that because it goes over the counters you already have. It is the other side of our business. If your Bailey kitchen is due for new tops, see the countertop page.
Timing a pour around the weather.
We pour most of the year. What moves a date is slab temperature, not the calendar, so a mild January week is often better than a brutal July afternoon.
What moves the price.
A phone price would not mean much. What is under the old coating changes the job, and you only find that out standing on the slab. Size alone tells us very little.
Photos are a good place to start. Send a couple along with the rough size, and we can tell you whether your project lands in the range you have in mind before anybody makes a trip. After that we come out, walk the slab, and give you a number that same day. It stays put once we begin.
How the two days run.
Most of the work happens before any resin comes out. The first day belongs to the grinders: the slab gets taken down to clean, open concrete with the dust extractor running, and every crack or pit the grind turns up gets chased and filled before we leave. The second day is the pour and the topcoat, and it moves a lot quicker than the first.
Your part of the job is small. Have the space emptied out before we arrive on the first morning, since we grind every square foot of the slab. Then stay off it until the next morning, when walking on it is fine, and keep the vehicles out until day three or four. Cooler weather pushes that toward four.
Who actually pours it.
Alpha Resin is a small shop on purpose. Fewer floors, poured by the person whose name is on the truck.
Insured and bonded, 5 years of pours, and a phone the owner answers. See the gallery, read about the rest of Nash County, or send photos of the slab.
Alpha Resin works a 60-mile radius around Goldsboro, and Bailey is inside it. If your address is out past the edge of town, do not rule yourself out. A county line on a map says very little about how far the trailer drives, so give us a call and ask. Most of the time we can get there.
Questions from Bailey customers
Can you match a color I have seen?
Close, and usually closer than people expect. Bring a photo. Metallic pigment moves on its own while it cures, so the floor reads as that look rather than copying it exactly.
How much dust does the grinding make?
Less than people picture. The grinder runs into a dust extractor at the tool, so it is captured where it is made. It is not zero, and we sheet off doorways, but it does not fill the house.
Do you take on small jobs?
Yes. A single-bay garage, a laundry room, a set of counters. Small work is a good share of the schedule and it is how most people try us before a bigger job.
Is there a warranty?
Yes, and it is worth reading rather than framing. Ask when we quote and we will tell you plainly what it covers and what it does not.
How far out are you booking?
It moves with the season. Spring and fall fill first. Call and we will tell you honestly where you would land rather than telling you what you want to hear.
Got a slab in Bailey?
Tell us roughly how big the space is and send a photo or two. We will say what the job needs.
Not ready to call? Browse the gallery first. When you do call, you talk to Beto Ponce, the owner.
(919) 440-1333