Resin floors across Pitt County.
Greenville sits roughly 39 miles out, comfortably inside the service radius. Poured by the owner, ground down to clean concrete first.
Insured and bonded · 5 years · every floor poured by the owner
Get a free quote
Photos and rough square footage get you a real number.
What we install around Pitt County.
Greenville sits roughly 39 miles out, comfortably inside the service radius.
Greenville sits about 45 minutes from the shop in Goldsboro, well inside the 60 mile radius we cover. We cover Greenville and the communities between them: Greenville, Winterville, Ayden, Farmville, Grifton, Grimesland, Fountain, Bethel, Simpson, Falkland.
Garages are the bulk of the work, but a good share of what we pour in Pitt County is countertops, because resurfacing a kitchen costs a fraction of replacing the counters and takes two or three days instead of two weeks.
Whatever the room is, the sequence does not change. We grind the slab down to open concrete, fix what the grind exposes, then pour. Read more about how we prep concrete or tell us what you are looking at.
Towns we cover in Pitt County
Work from around the county
Which floor belongs in which room.
Flake is the workhorse. Vinyl chip broadcast into the base coat and locked under a clear topcoat, it hides tire marks and dust and gives you grip when the floor is wet. Most garages around Pitt County end up here once people have seen both options in person.
Metallic is the showpiece. Pigment moves while the resin cures, so the pattern is decided in the twenty minutes the floor is still workable and no two come out the same. Quartz is the toughest thing we install, graded sand set in resin with slip resistance built into the texture, and it belongs in laundry rooms, workshops, and anywhere water and traffic show up together.
Countertops are their own category. The resin pours over the counters you already have, so a kitchen changes completely without a tear-out. Read more on the countertops page.
What we pour
What the ground here does to a slab.
This is coastal plain country. Sandy soil, a water table that moves with the season, and eight months a year of real humidity. Slabs poured on that ground shift a little, and the hairline cracking that comes with it is normal rather than alarming. What matters is catching it during the grind and filling it, instead of coating straight over it and watching it telegraph through the finish six months later.
The bigger issue is vapor. A lot of the housing stock around Pitt County went down without a vapor barrier under the slab, because for years that was normal practice. Those floors push moisture upward every day, and a coating that cannot breathe traps it and lifts. We test before quoting. If a slab is too wet for the system you want, we will say so and price something that can handle it.
How a job in Pitt County runs.
Everything comes out on a trailer: grinders, dust extraction, mixing gear and material. Day one is prep, which is the loud and dusty half. Day two is the pour. You can walk on it the next morning and put a vehicle back on it in three to four days depending on temperature.
The garage needs to be completely empty the morning we start, because we have to grind the whole slab. That is the one piece of the job that falls on you, and it is worth doing the weekend before rather than the morning of.
Questions from Pitt County customers
How much dust does the grinding make?
Less than people picture. The grinder runs into a dust extractor at the tool, so it is captured where it is made. It is not zero, and we sheet off doorways, but it does not fill the house.
Do you take on small jobs?
Yes. A single-bay garage, a laundry room, a set of counters. Small work is a good share of the schedule and it is how most people try us before a bigger job.
Is there a warranty?
Yes, and it is worth reading rather than framing. Ask when we quote and we will tell you plainly what it covers and what it does not.
How far out are you booking?
It moves with the season. Spring and fall fill first. Call and we will tell you honestly where you would land rather than telling you what you want to hear.
What if I already have a coating that is failing?
That is a normal starting point. It comes off in the grind, and what is underneath decides what the job actually is. We would rather find that on day one than after.
Working in Pitt County this month.
Send a photo of the slab and the rough size. You get a number the day we look at it.
Questions go to Beto Ponce directly, with no answering service in between. Want to see his work? Start with the gallery.
(919) 440-1333