Floors worth looking down at, Walstonburg.
Insured and bonded epoxy flooring for Walstonburg. Every metallic, flake or quartz floor is ground and poured by the owner himself.
Insured and bonded · 5 years · every floor poured by the owner
Get a free quote
Photos and rough square footage get you a real number.
Resin floors for Walstonburg homes.
Walstonburg calls usually start the same way: the slab is dusting, there is a stain that will not come up, and somebody is tired of looking at it.
We run out to Walstonburg from the shop in Goldsboro, about 25 minutes out. Walstonburg is in Greene County, and we cover the towns around it too, including Snow Hill, Hookerton.
Most garage floors in Walstonburg were poured, troweled, and never touched again. That slab has been soaking up whatever landed on it ever since.
Beto came to epoxy from land clearing and excavation, and it shows in how much of every job goes into the slab itself. Each floor gets a diamond grind down to open concrete, the cracks get chased and filled, and then the pour and topcoat go on. He owns the grinding equipment so that step never gets cut short.
What eastern North Carolina does to a slab.
When someone tells us their old floor bubbled or came up in sheets, the cause is usually moisture coming up from below. Slabs in coastal plain country sit on sand over a water table that rises and falls, and one poured without a vapor barrier keeps pushing that moisture up through itself for as long as it exists. Put a coating on it that cannot breathe and the vapor gathers underneath until the coating lets go.
So we test before we quote rather than after. If the slab is wet we say so and price the system that can handle it, and if it is bad enough that no coating belongs on it we will tell you that too. It is a shorter conversation than the one that happens a year after a floor fails.
Heat speeds resin up. The cure is a chemical reaction, and the warmer the slab and the air, the faster it runs, which cuts into the time we have to work the material. In an uninsulated Walstonburg garage that shows most in the summer months, and most of all on metallic pours. We set the schedule with that in mind.
What we pour in Walstonburg
Recent pours
Which rooms we end up in.
Garage calls usually start with something you can see from the doorway. Either the slab is shedding dust or there is a dark stain where the car parks that will not come clean. That is why the garage is most of our work, and a two-car bay is the most common quote we write.
Plenty of people who call about a garage end up asking about the kitchen. Countertops are the other side of the business: resin goes over your current counters, so your Walstonburg kitchen looks brand new while the cabinets and plumbing stay exactly where they are. You can read how we pour countertops before you call.
Timing a pour around the weather.
Temperature controls how resin behaves. Mild weather gives us the most time to work, so spring and fall dates go fast. In summer we pour early, before the heat builds. In winter we wait on a slab that is warm enough. Pretty much any month can work with the right timing.
What moves the price.
The least expensive floor we do is a clean, solid slab that has never been coated. Anything else costs more because it means more prep, whether that is cracks to chase or a failed coating to grind off. Prep is the bulk of the labor on any job, so the slab’s shape matters about as much as its square footage.
Once we start, the number does not change. We set it the day we walk the slab, after we have seen the cracks and the old coating in person. Want a gut check before anyone drives out? Send a few photos and we will tell you whether you are in the right range.
How the two days run.
Day one is prep. Grinders and dust extraction come off the trailer and the slab gets taken down to clean concrete, then the cracks and pits that the grind exposes get chased out and filled. It is loud and it is dusty, and it is most of the labor in the job. Day two is the pour and the topcoat, which is the fast half.
The room has to be completely empty the morning we start, because we grind the whole slab rather than working around things. Light foot traffic is fine the next morning. Vehicles go back on at day three or four depending on how warm it is, and rushing that is the one shortcut that will mark a brand new floor.
Who actually pours it.
Beto Ponce does the pours himself. The person who quotes your floor is the person standing on it with a squeegee.
Insured and bonded, 5 years of pours, and a phone the owner answers. See the gallery, read about the rest of Greene County, or send photos of the slab.
The same person who answers the phone drives the trailer out, so the question of whether we come to you is easy to settle. Walstonburg is well within the 10 counties we cover from Goldsboro. If you are a few miles beyond town, call before you assume we will not come. Town limits rarely line up with the real drive.
Questions from Walstonburg customers
Is there a warranty?
Yes, and it is worth reading rather than framing. Ask when we quote and we will tell you plainly what it covers and what it does not.
How far out are you booking?
It moves with the season. Spring and fall fill first. Call and we will tell you honestly where you would land rather than telling you what you want to hear.
What if I already have a coating that is failing?
That is a normal starting point. It comes off in the grind, and what is underneath decides what the job actually is. We would rather find that on day one than after.
Do I have to coat it after grinding?
No, the coating is optional. We grind slabs that never get coated, then seal them and call it done. Shop floors are a common example, along with any concrete the owner likes as it is.
Will grinding get rid of the oil stains?
It removes the stained surface layer, which handles most of it. Oil that has soaked deep into the slab can ghost back, so heavy contamination gets a degreasing pass first and sometimes a primer.
Got a slab in Walstonburg?
A couple of pictures and a rough size is all it takes to start. We will tell you what the slab needs.
The phone goes straight to Beto Ponce, the owner who pours the floors. Past jobs are in the gallery.
(919) 440-1333