Floors worth looking down at, Fountain.
Metallic, flake and quartz floors for Fountain homes, plus resin countertops. Beto Ponce pours every one himself, and the company is insured and bonded.
Insured and bonded · 5 years · every floor poured by the owner
Get a free quote
Photos and rough square footage get you a real number.
Resin floors for Fountain homes.
The concrete around Fountain is no different from anywhere else in the county. What differs is how long it has been left open to whatever lands on it.
We run out to Fountain from the shop in Goldsboro, about 45 minutes out. Fountain is in Pitt County, and we cover the towns around it too, including Greenville, Winterville, Ayden, Farmville.
The difference between a coating that lasts nine years and one that peels in nine months is almost never the resin. It is what happened to the concrete before the resin went down.
A floor that is still tight in ten years got that way on the first day. That is the grind: diamond tooling takes the slab down to clean, open concrete so the resin has something to bite into, and any cracks it uncovers get chased out and filled. The pour and topcoat follow, and they are the easy part.
Why slabs around here fail early.
People who call us about a floor that failed usually assume the coating was bad. Most of the time it was fine. What failed was the prep: the slab was already moving on its sandy base and opening hairline cracks, and nobody dealt with them before the coating went down, so within a year those lines came right through.
Repair work is most of what separates a floor that lasts from one that cracks through. We chase each crack into a V and fill it with a rigid repair resin, patch the pits and grind them level, and treat the control joints so they can keep moving under the finish. None of it is visible once the coating is down.
Heat matters as much as the ground does. Resin cures by chemical reaction, and a hot Fountain garage in July shortens the working window enough to change how a metallic pour is handled. We schedule around the slab temperature rather than the calendar.
What we pour in Fountain
Recent pours
Which rooms we end up in.
Most calls start in the garage, but a good share end up somewhere else in the house. Once people see what a resin floor does to a bay they start looking at the laundry room, the sunroom, the basement steps.
Your old counters become the base. We prep them and pour resin over the top, which means your Fountain kitchen gets a new surface without demolition and without a week of waiting on cut stone. Countertop work is a steady part of what we do. More on countertop pours.
Timing a pour around the weather.
The busy stretch runs from about March through June and then again in September and October. If you want a specific week, calling a month out is the difference between getting it and waiting.
What moves the price.
Price tracks the prep, not the resin. The material cost between a simple flake floor and a showpiece metallic pour is real but modest; the hours in the grind and the repair are what change the total.
Which is why we come out and look. You get a number the day we walk the slab, and that number does not move once the work starts. Send a couple of photos and we will tell you whether we are in the right range before anybody drives anywhere.
How the two days run.
Most of the work happens before any resin comes out. The first day belongs to the grinders: the slab gets taken down to clean, open concrete with the dust extractor running, and every crack or pit the grind turns up gets chased and filled before we leave. The second day is the pour and the topcoat, and it moves a lot quicker than the first.
Your part of the job is small. Have the space emptied out before we arrive on the first morning, since we grind every square foot of the slab. Then stay off it until the next morning, when walking on it is fine, and keep the vehicles out until day three or four. Cooler weather pushes that toward four.
Who actually pours it.
Every floor Alpha Resin puts down gets poured by the owner. There is no crew that shows up instead of the person you talked to.
Insured and bonded, 5 years of pours, and a phone the owner answers. See the gallery, read about the rest of Pitt County, or send photos of the slab.
Short answer for anyone near Fountain: yes, we come out. It sits well inside the 10 counties Alpha Resin covers from Goldsboro. The longer answer is for folks on a rural road or just past the town limits. Call and ask anyway, because what matters is drive time from Goldsboro, and that rarely follows the lines on a map.
Questions from Fountain customers
Can you coat a floor that already has something on it?
Usually. Old paint, failed sealer, and most previous coatings come off in the grind. If there is a moisture problem underneath we will tell you before we quote it, not after.
Is it slippery when wet?
A smooth topcoat is slick wet, same as polished concrete. For garages, patios and pool decks we broadcast an aggregate into the topcoat so it grips. Say the word and we will spec it.
How much does a floor cost?
There is no fair number until we see the slab. A sound floor and a cracked, oil-soaked one of the same size price very differently, and the system you choose matters too. Give us a call at (919) 440-1333 and we will come out.
Do you work in cold weather?
Resin cures by chemical reaction and the reaction slows down when the slab is cold. We work most of the Carolina winter, but we watch the slab temperature and will move a date rather than pour into conditions that will hurt the finish.
How long will it last?
A properly prepped residential floor is a ten to fifteen year surface. The ones that fail early almost always failed at prep, not at the resin.
Got a slab in Fountain?
Tell us roughly how big the space is and send a photo or two. We will say what the job needs.
Call and you get Beto Ponce, not a call center. Or look through the gallery first.
(919) 440-1333