Floors worth looking down at, Sharpsburg.
Metallic, flake and quartz floors for Sharpsburg homes, plus resin countertops. Beto Ponce pours every one himself, and the company is insured and bonded.
Insured and bonded · 5 years · every floor poured by the owner
Get a free quote
Photos and rough square footage get you a real number.
Resin floors for Sharpsburg homes.
We get to Sharpsburg often enough that the trailer knows the way.
We run out to Sharpsburg from the shop in Goldsboro, about 35 minutes out. Sharpsburg is in Wilson County, and we cover the towns around it too, including Wilson, Black Creek, Lucama, Stantonsburg.
A floor is the one surface in the house that gets walked on, parked on, dropped on, and then judged anyway.
A floor that is still tight in ten years got that way on the first day. That is the grind: diamond tooling takes the slab down to clean, open concrete so the resin has something to bite into, and any cracks it uncovers get chased out and filled. The pour and topcoat follow, and they are the easy part.
The ground under a slab in Sharpsburg.
This is coastal plain country. Sandy soil, a water table that rises and falls through the year, and eight months of genuine humidity. Slabs poured on that ground move a little, and the fine cracking that comes with it is normal rather than alarming. What matters is catching it during the grind instead of coating over it.
We test for moisture before we quote, every time. Too many local slabs were poured without a vapor barrier under them, and those floors push moisture up constantly. Learning that after the coating is down means a floor that lifts and a second job nobody wanted to pay for. Learning it first just changes which system we use.
Then there is the heat. A resin pour in an uninsulated garage in August behaves differently from the same pour in October, and on a metallic floor that difference shows up in the pattern. Knowing that is most of what five years of pouring in this climate buys you.
What we pour in Sharpsburg
Recent pours
Which rooms we end up in.
The rooms change but the problem does not. Bare concrete is porous, it stains, it dusts, and sealing it after the fact with something off a shelf almost never holds.
Replacing counters the usual way means waiting on a templated slab and living with plywood in the meantime. A resin countertop skips all of that because it goes over the counters you already have. It is the other side of our business. If your Sharpsburg kitchen is due for new tops, see the countertop page.
Timing a pour around the weather.
We pour most of the year. What moves a date is slab temperature, not the calendar, so a mild January week is often better than a brutal July afternoon.
What moves the price.
A phone price would not mean much. What is under the old coating changes the job, and you only find that out standing on the slab. Size alone tells us very little.
Photos are a good place to start. Send a couple along with the rough size, and we can tell you whether your project lands in the range you have in mind before anybody makes a trip. After that we come out, walk the slab, and give you a number that same day. It stays put once we begin.
How the two days run.
Most of the work happens before any resin comes out. The first day belongs to the grinders: the slab gets taken down to clean, open concrete with the dust extractor running, and every crack or pit the grind turns up gets chased and filled before we leave. The second day is the pour and the topcoat, and it moves a lot quicker than the first.
Your part of the job is small. Have the space emptied out before we arrive on the first morning, since we grind every square foot of the slab. Then stay off it until the next morning, when walking on it is fine, and keep the vehicles out until day three or four. Cooler weather pushes that toward four.
Who actually pours it.
Alpha Resin is a small shop on purpose. Fewer floors, poured by the person whose name is on the truck.
Insured and bonded, 5 years of pours, and a phone the owner answers. See the gallery, read about the rest of Wilson County, or send photos of the slab.
Short answer for anyone near Sharpsburg: yes, we come out. It sits well inside the 10 counties Alpha Resin covers from Goldsboro. The longer answer is for folks on a rural road or just past the town limits. Call and ask anyway, because what matters is drive time from Goldsboro, and that rarely follows the lines on a map.
Questions from Sharpsburg customers
Do you take on small jobs?
Yes. A single-bay garage, a laundry room, a set of counters. Small work is a good share of the schedule and it is how most people try us before a bigger job.
Is there a warranty?
Yes, and it is worth reading rather than framing. Ask when we quote and we will tell you plainly what it covers and what it does not.
How far out are you booking?
It moves with the season. Spring and fall fill first. Call and we will tell you honestly where you would land rather than telling you what you want to hear.
What if I already have a coating that is failing?
That is a normal starting point. It comes off in the grind, and what is underneath decides what the job actually is. We would rather find that on day one than after.
Do I have to coat it after grinding?
No. Grinding stands on its own as a service. Plenty of shop floors and plain slabs get ground, sealed and left that way, and if you like the look of bare concrete there is no reason to put color over it.
Got a slab in Sharpsburg?
Start with a few phone pictures and the rough dimensions. Beto will tell you what it would take to do it right.
Not ready to call? Browse the gallery first. When you do call, you talk to Beto Ponce, the owner.
(919) 440-1333