Floors worth looking down at, Clayton.
Resin floors and countertops around Clayton, poured by the owner, Beto Ponce. Insured and bonded, with metallic work as the specialty.
Insured and bonded · 5 years · every floor poured by the owner
Get a free quote
Photos and rough square footage get you a real number.
Resin floors for Clayton homes.
The concrete around Clayton is no different from anywhere else in the county. What differs is how long it has been left open to whatever lands on it.
We run out to Clayton from the shop in Goldsboro, about 30 minutes out. Clayton is in Johnston County, and we cover the towns around it too, including Smithfield, Selma, Princeton, Pine Level.
The difference between a coating that lasts nine years and one that peels in nine months is almost never the resin. It is what happened to the concrete before the resin went down.
Beto came to epoxy from land clearing and excavation, and it shows in how much of every job goes into the slab itself. Each floor gets a diamond grind down to open concrete, the cracks get chased and filled, and then the pour and topcoat go on. He owns the grinding equipment so that step never gets cut short.
Why slabs around here fail early.
Sandy ground does not hold still. It shifts through the year, and the slab on top of it moves with it, which slowly opens the hairline cracks that are already there. Coat over those without treating them and every crack reappears in the finish, usually inside a year. When we get called out to a failed floor, that is usually what we find, and the resin had little to do with it.
Pits and cracks get dealt with one at a time. Every pit is patched and then ground back down so it sits flat with the rest of the slab. Every crack is cut out into a V and packed with rigid repair resin. Control joints are treated so they still flex without splitting the coating. It is slow, plain work, and the floor depends on it.
The slab temperature drives our schedule more than the calendar does. In a hot Clayton garage in July, the chemical reaction that cures resin speeds up and the working window shrinks, which changes how a metallic pour has to be handled. The ground is only half of it.
What we pour in Clayton
Recent pours
Which rooms we end up in.
The garage is usually the first job, but it often is not the last. After seeing the bay done, people start asking about the laundry room or the sunroom, and sometimes the basement steps.
The metallic work that people notice on our floors goes on countertops too. Beto pours it right over the existing counters in your Clayton kitchen, so the cabinets stay and nobody cooks on plywood for a week while stone gets cut. Read what a countertop job involves for the details.
Timing a pour around the weather.
The busy stretch runs from about March through June and then again in September and October. If you want a specific week, calling a month out is the difference between getting it and waiting.
What moves the price.
Price tracks the prep, not the resin. The material cost between a simple flake floor and a showpiece metallic pour is real but modest; the hours in the grind and the repair are what change the total.
Once we start, the number does not change. We set it the day we walk the slab, after we have seen the cracks and the old coating in person. Want a gut check before anyone drives out? Send a few photos and we will tell you whether you are in the right range.
How the two days run.
Expect noise on the first day. We unload the grinders and the dust extraction, take the whole slab down to bare concrete, then go back over the cracks and pits the grind opened up and fill them. That prep is the heavy, dusty part and it eats most of the hours. The coating goes down on the second day, base pour and then the topcoat.
Everything has to come off the floor before we get there, shelving and all. The grinder covers the whole slab edge to edge, so an empty room on the first morning is the one thing we ask for. After the topcoat you can walk on it the next day. Driving on it waits until day three or four.
Who actually pours it.
Every floor Alpha Resin puts down gets poured by the owner. There is no crew that shows up instead of the person you talked to.
Insured and bonded, 5 years of pours, and a phone the owner answers. See the gallery, read about the rest of Johnston County, or send photos of the slab.
The same person who answers the phone drives the trailer out, so the question of whether we come to you is easy to settle. Clayton is well within the 10 counties we cover from Goldsboro. If you are a few miles beyond town, call before you assume we will not come. Town limits rarely line up with the real drive.
Questions from Clayton customers
Do you move what is in the room?
No, and it is the one thing we ask of you. The space has to be completely empty the morning we start because we grind the whole slab rather than working around things. Doing it the weekend before is easier than doing it that morning.
What happens if it rains that week?
Interior work carries on. Outdoor work moves, because resin curing under rain or heavy dew is ruined resin. We would rather shift a date than pour into a forecast we do not like.
Can you match a color I have seen?
Close, and usually closer than people expect. Bring a photo. Metallic pigment moves on its own while it cures, so the floor reads as that look rather than copying it exactly.
How much dust does the grinding make?
Less than people picture. The grinder runs into a dust extractor at the tool, so it is captured where it is made. It is not zero, and we sheet off doorways, but it does not fill the house.
Do you take on small jobs?
Yes. A single-bay garage, a laundry room, a set of counters. Small work is a good share of the schedule and it is how most people try us before a bigger job.
Got a slab in Clayton?
Photos plus an approximate square footage gets you a straight answer on what the floor will take.
Beto Ponce picks up when you call. If you want to see his floors first, the gallery has plenty.
(919) 440-1333