Floors worth looking down at, Spring Hope.
Insured and bonded epoxy flooring for Spring Hope. Every metallic, flake or quartz floor is ground and poured by the owner himself.
Insured and bonded · 5 years · every floor poured by the owner
Get a free quote
Photos and rough square footage get you a real number.
Resin floors for Spring Hope homes.
Spring Hope calls usually start the same way: the slab is dusting, there is a stain that will not come up, and somebody is tired of looking at it.
We run out to Spring Hope from the shop in Goldsboro, about 50 minutes out. Spring Hope is in Nash County, and we cover the towns around it too, including Rocky Mount, Nashville, Bailey, Middlesex.
Most garage floors in Spring Hope were poured, troweled, and never touched again. That slab has been soaking up whatever landed on it ever since.
Cracks get filled before color goes down, never after. The diamond grind takes the slab down to clean concrete, every hairline it exposes gets chased and filled, and only then does the resin go on. Then the resin goes down and the topcoat goes over it. Same order on every floor we do.
Why slabs around here fail early.
Sandy ground does not hold still. It shifts through the year, and the slab on top of it moves with it, which slowly opens the hairline cracks that are already there. Coat over those without treating them and every crack reappears in the finish, usually inside a year. When we get called out to a failed floor, that is usually what we find, and the resin had little to do with it.
Pits and cracks get dealt with one at a time. Every pit is patched and then ground back down so it sits flat with the rest of the slab. Every crack is cut out into a V and packed with rigid repair resin. Control joints are treated so they still flex without splitting the coating. It is slow, plain work, and the floor depends on it.
The slab temperature drives our schedule more than the calendar does. In a hot Spring Hope garage in July, the chemical reaction that cures resin speeds up and the working window shrinks, which changes how a metallic pour has to be handled. The ground is only half of it.
What we pour in Spring Hope
Recent pours
Which rooms we end up in.
The garage is usually the first job, but it often is not the last. After seeing the bay done, people start asking about the laundry room or the sunroom, and sometimes the basement steps.
Plenty of people who call about a garage end up asking about the kitchen. Countertops are the other side of the business: resin goes over your current counters, so your Spring Hope kitchen looks brand new while the cabinets and plumbing stay exactly where they are. You can read how we pour countertops before you call.
Timing a pour around the weather.
The busy stretch runs from about March through June and then again in September and October. If you want a specific week, calling a month out is the difference between getting it and waiting.
What moves the price.
Price tracks the prep, not the resin. The material cost between a simple flake floor and a showpiece metallic pour is real but modest; the hours in the grind and the repair are what change the total.
So we come look at the floor in person. You get a firm number on the day of the visit, and it does not creep up once the grinders are running. If you would rather check the range first, photos of the slab are enough for a rough yes or no.
How the two days run.
You usually do not know what the slab is hiding until the grinder opens it up. That is the first day: grind the floor down to clean concrete with the extractor pulling dust at the tool, then chase out and fill every crack and pit the grind exposes. It is the loud, slow half of the job. The pour and topcoat come the next day and go fast.
The one thing we will push back on is driving onto the floor too soon. It can take foot traffic the morning after, but a vehicle needs day three or four, depending on the warmth, or it leaves marks in a finish that is still curing. On the first morning we also need the room cleared, because the whole slab gets ground.
Who actually pours it.
Every floor Alpha Resin puts down gets poured by the owner. There is no crew that shows up instead of the person you talked to.
Insured and bonded, 5 years of pours, and a phone the owner answers. See the gallery, read about the rest of Nash County, or send photos of the slab.
Coverage questions are a quick phone call. Spring Hope is inside our area, which runs across 10 counties out of Goldsboro and about 60 miles in any direction. Addresses out on the edge are usually fine too, since a town or county boundary does not tell you much about the actual drive. Ask before you count yourself out.
Questions from Spring Hope customers
Do you work in cold weather?
Yes, most of the winter. Cold slows the chemical reaction that cures resin, so we keep an eye on the slab temperature and only pour when it is warm enough. If a cold snap puts the finish at risk, we will move the date.
How long will it last?
A properly prepped residential floor is a ten to fifteen year surface. The ones that fail early almost always failed at prep, not at the resin.
Do you move what is in the room?
No, and it is the one thing we ask of you. The space has to be completely empty the morning we start because we grind the whole slab rather than working around things. Doing it the weekend before is easier than doing it that morning.
What happens if it rains that week?
Interior work carries on. Outdoor work moves, because resin curing under rain or heavy dew is ruined resin. We would rather shift a date than pour into a forecast we do not like.
Can you match a color I have seen?
Close, and usually closer than people expect. Bring a photo. Metallic pigment moves on its own while it cures, so the floor reads as that look rather than copying it exactly.
Got a slab in Spring Hope?
Send a couple of photos and the rough square footage. We will tell you what it takes.
The phone goes straight to Beto Ponce, the owner who pours the floors. Past jobs are in the gallery.
(919) 440-1333