Floors worth looking down at, Bethel.
Metallic, flake and quartz floors for Bethel homes, plus resin countertops. Beto Ponce pours every one himself, and the company is insured and bonded.
Insured and bonded · 5 years · every floor poured by the owner
Get a free quote
Photos and rough square footage get you a real number.
Resin floors for Bethel homes.
Most of the garages we coat around Bethel were poured with the house and never touched since.
We run out to Bethel from the shop in Goldsboro, about 45 minutes out. Bethel is in Pitt County, and we cover the towns around it too, including Greenville, Winterville, Ayden, Farmville.
Concrete is porous. It drinks oil, it dusts under tires, and once a stain is in there it stays. A resin floor closes the slab off for good.
Metallic, flake and quartz look nothing alike, but underneath they start the same way. The slab gets diamond ground to clean, open concrete, the cracks that turn up get chased and filled, and only then does the color go down with a topcoat over it. What you pick changes the look. The grind is what keeps it bonded for years.
Why slabs around here fail early.
Lines showing up in a coated floor within the first year usually trace back to the concrete underneath. Sandy subgrade moves as the seasons change, the hairline cracks in the slab open a little, and a coating poured directly over them shows each one on the surface. People blame the product when the slab was the problem.
Control joints get special treatment, since they exist so the slab can move. We treat them so that movement can keep happening without cracking the finish above. Cracks get opened into a V and filled with a rigid repair resin, and pits get patched and ground flat again. It takes time nobody sees in a photo, and it is what keeps a floor intact for ten years.
Summer heat causes its own trouble. A garage in Bethel in July runs hot enough to shorten the time resin stays workable, since it cures by chemical reaction, and a metallic pour feels that most. So we go by how warm the slab actually is when we set a date.
What we pour in Bethel
Recent pours
Which rooms we end up in.
Plenty of homeowners call about the garage and then ask about another room. Laundry rooms and sunrooms come up a lot, and so do basement steps. Outside, it tends to be the patio or the pool deck.
Your old counters become the base. We prep them and pour resin over the top, which means your Bethel kitchen gets a new surface without demolition and without a week of waiting on cut stone. Countertop work is a steady part of what we do. More on countertop pours.
Timing a pour around the weather.
The busy stretch runs from about March through June and then again in September and October. If you want a specific week, calling a month out is the difference between getting it and waiting.
What moves the price.
Price tracks the prep, not the resin. The material cost between a simple flake floor and a showpiece metallic pour is real but modest; the hours in the grind and the repair are what change the total.
Photos are a good place to start. Send a couple along with the rough size, and we can tell you whether your project lands in the range you have in mind before anybody makes a trip. After that we come out, walk the slab, and give you a number that same day. It stays put once we begin.
How the two days run.
If you look in at the end of the first day, there is no color on the floor yet. That is normal. Day one is all grinding, taking the slab down to clean concrete and filling the cracks and pits the grind turns up, and it is the dusty, loud part of the job. Color and topcoat happen on day two, and that part goes quickly.
How fast you get the garage back depends mostly on the temperature. Resin keeps curing for days after it looks done, so light foot traffic is fine the next morning, while cars wait until day three in warm weather and day four when it is cooler. Parking early is how a brand new floor gets marked. And the room has to be empty when we start.
Who actually pours it.
Every floor Alpha Resin puts down gets poured by the owner. There is no crew that shows up instead of the person you talked to.
Insured and bonded, 5 years of pours, and a phone the owner answers. See the gallery, read about the rest of Pitt County, or send photos of the slab.
Some people outside Bethel assume they are too far out and never call. Usually they are not. We pour across 10 counties from a Goldsboro base, and the boundaries on a map are a poor guide to how far that really is by truck and trailer. If you are unsure whether your place is covered, call and we will tell you straight.
Questions from Bethel customers
Can you coat a floor that already has something on it?
Usually. Old paint, failed sealer, and most previous coatings come off in the grind. If there is a moisture problem underneath we will tell you before we quote it, not after.
Is it slippery when wet?
A smooth topcoat is slick wet, same as polished concrete. For garages, patios and pool decks we broadcast an aggregate into the topcoat so it grips. Say the word and we will spec it.
How much does a floor cost?
We price it after we have seen the floor. Size, the condition of the slab and the system you pick all move the number, so a quote over the phone would be a guess. Call (919) 440-1333 to set up a visit.
Do you work in cold weather?
We do. A Carolina winter leaves plenty of workable days, and the one thing we check closely is how cold the slab is, since resin cures by chemical reaction and cold slows it down. We would rather reschedule than pour into conditions that hurt the finish.
How long will it last?
A properly prepped residential floor is a ten to fifteen year surface. The ones that fail early almost always failed at prep, not at the resin.
Got a slab in Bethel?
Tell us roughly how big the space is and send a photo or two. We will say what the job needs.
Call and you get Beto Ponce, not a call center. Or look through the gallery first.
(919) 440-1333