Floors worth looking down at, Benson.
Metallic, flake and quartz systems for homes around Benson. Insured, bonded, and poured by the owner.
Insured and bonded · 5 years · every floor poured by the owner
Get a free quote
Photos and rough square footage get you a real number.
Resin floors for Benson homes.
Most of the garages we coat around Benson were poured with the house and never touched since.
We run out to Benson from the shop in Goldsboro, about 30 minutes out. Benson is in Johnston County, and we cover the towns around it too, including Smithfield, Selma, Princeton, Pine Level.
Concrete is porous. It drinks oil, it dusts under tires, and once a stain is in there it stays. A resin floor closes the slab off for good.
Cracks get filled before color goes down, never after. The diamond grind takes the slab down to clean concrete, every hairline it exposes gets chased and filled, and only then does the resin go on. Then the resin goes down and the topcoat goes over it. Same order on every floor we do.
Why slabs around here fail early.
Sandy ground does not hold still. It shifts through the year, and the slab on top of it moves with it, which slowly opens the hairline cracks that are already there. Coat over those without treating them and every crack reappears in the finish, usually inside a year. When we get called out to a failed floor, that is usually what we find, and the resin had little to do with it.
Pits and cracks get dealt with one at a time. Every pit is patched and then ground back down so it sits flat with the rest of the slab. Every crack is cut out into a V and packed with rigid repair resin. Control joints are treated so they still flex without splitting the coating. It is slow, plain work, and the floor depends on it.
The slab temperature drives our schedule more than the calendar does. In a hot Benson garage in July, the chemical reaction that cures resin speeds up and the working window shrinks, which changes how a metallic pour has to be handled. The ground is only half of it.
What we pour in Benson
Recent pours
Which rooms we end up in.
The garage is usually the first job, but it often is not the last. After seeing the bay done, people start asking about the laundry room or the sunroom, and sometimes the basement steps.
The metallic work that people notice on our floors goes on countertops too. Beto pours it right over the existing counters in your Benson kitchen, so the cabinets stay and nobody cooks on plywood for a week while stone gets cut. Read what a countertop job involves for the details.
Timing a pour around the weather.
The busy stretch runs from about March through June and then again in September and October. If you want a specific week, calling a month out is the difference between getting it and waiting.
What moves the price.
Price tracks the prep, not the resin. The material cost between a simple flake floor and a showpiece metallic pour is real but modest; the hours in the grind and the repair are what change the total.
Surprises in the middle of a job are what people dread, so we do the looking up front. We test the slab and hand you a number that same day, and that number holds after the work starts. A few photos and the square footage are enough for us to tell you if you are in the right range.
How the two days run.
Day one is prep. Grinders and dust extraction come off the trailer and the slab gets taken down to clean concrete, then the cracks and pits that the grind exposes get chased out and filled. It is loud and it is dusty, and it is most of the labor in the job. Day two is the pour and the topcoat, which is the fast half.
Everything has to come off the floor before we get there, shelving and all. The grinder covers the whole slab edge to edge, so an empty room on the first morning is the one thing we ask for. After the topcoat you can walk on it the next day. Driving on it waits until day three or four.
Who actually pours it.
Every floor Alpha Resin puts down gets poured by the owner. There is no crew that shows up instead of the person you talked to.
Insured and bonded, 5 years of pours, and a phone the owner answers. See the gallery, read about the rest of Johnston County, or send photos of the slab.
The same person who answers the phone drives the trailer out, so the question of whether we come to you is easy to settle. Benson is well within the 10 counties we cover from Goldsboro. If you are a few miles beyond town, call before you assume we will not come. Town limits rarely line up with the real drive.
Questions from Benson customers
What happens if it rains that week?
Interior work carries on. Outdoor work moves, because resin curing under rain or heavy dew is ruined resin. We would rather shift a date than pour into a forecast we do not like.
Can you match a color I have seen?
Close, and usually closer than people expect. Bring a photo. Metallic pigment moves on its own while it cures, so the floor reads as that look rather than copying it exactly.
How much dust does the grinding make?
Less than people picture. The grinder runs into a dust extractor at the tool, so it is captured where it is made. It is not zero, and we sheet off doorways, but it does not fill the house.
Do you take on small jobs?
Yes. A single-bay garage, a laundry room, a set of counters. Small work is a good share of the schedule and it is how most people try us before a bigger job.
Is there a warranty?
Yes, and it is worth reading rather than framing. Ask when we quote and we will tell you plainly what it covers and what it does not.
Got a slab in Benson?
Photos plus an approximate square footage gets you a straight answer on what the floor will take.
The phone goes straight to Beto Ponce, the owner who pours the floors. Past jobs are in the gallery.
(919) 440-1333