Floors worth looking down at, Rolesville.
Resin floors and countertops around Rolesville, poured by the owner, Beto Ponce. Insured and bonded, with metallic work as the specialty.
Insured and bonded · 5 years · every floor poured by the owner
Get a free quote
Photos and rough square footage get you a real number.
Resin floors for Rolesville homes.
Rolesville calls usually start the same way: the slab is dusting, there is a stain that will not come up, and somebody is tired of looking at it.
We run out to Rolesville from the shop in Goldsboro, about an hour out. Rolesville is in Wake County, and we cover the towns around it too, including Raleigh, Garner, Knightdale, Wendell.
Most garage floors in Rolesville were poured, troweled, and never touched again. That slab has been soaking up whatever landed on it ever since.
Cracks get filled before color goes down, never after. The diamond grind takes the slab down to clean concrete, every hairline it exposes gets chased and filled, and only then does the resin go on. Then the resin goes down and the topcoat goes over it. Same order on every floor we do.
The ground under a slab in Rolesville.
Hairline cracks in a slab around here are normal. The ground is sandy coastal plain with a water table that comes up and drops back through the year, so concrete poured on it shifts a little over time. Those fine cracks are nothing to panic about. They just need to be found and filled during the grind so they never get coated over.
The age of the house matters here. Plenty of homes in this area were built before anyone routinely put a vapor barrier under the slab, so moisture has been coming up through those floors every day since. Seal that in under a coating and it will lift. We test every slab for it before we price the job.
Five years of pouring in this climate teaches you how heat changes resin. The same metallic floor behaves one way in an uninsulated garage in August and another way in October, and the difference shows up right in the pattern. Knowing which one you are walking into is a big part of the job.
What we pour in Rolesville
Recent pours
Which rooms we end up in.
The rooms change but the problem does not. Bare concrete is porous, it stains, it dusts, and sealing it after the fact with something off a shelf almost never holds.
Plenty of people who call about a garage end up asking about the kitchen. Countertops are the other side of the business: resin goes over your current counters, so your Rolesville kitchen looks brand new while the cabinets and plumbing stay exactly where they are. You can read how we pour countertops before you call.
Timing a pour around the weather.
We pour most of the year. What moves a date is slab temperature, not the calendar, so a mild January week is often better than a brutal July afternoon.
What moves the price.
A phone price would not mean much. What is under the old coating changes the job, and you only find that out standing on the slab. Size alone tells us very little.
Surprises in the middle of a job are what people dread, so we do the looking up front. We test the slab and hand you a number that same day, and that number holds after the work starts. A few photos and the square footage are enough for us to tell you if you are in the right range.
How the two days run.
Day one is prep. Grinders and dust extraction come off the trailer and the slab gets taken down to clean concrete, then the cracks and pits that the grind exposes get chased out and filled. It is loud and it is dusty, and it is most of the labor in the job. Day two is the pour and the topcoat, which is the fast half.
The one thing we will push back on is driving onto the floor too soon. It can take foot traffic the morning after, but a vehicle needs day three or four, depending on the warmth, or it leaves marks in a finish that is still curing. On the first morning we also need the room cleared, because the whole slab gets ground.
Who actually pours it.
Alpha Resin is a small shop on purpose. Fewer floors, poured by the person whose name is on the truck.
Insured and bonded, 5 years of pours, and a phone the owner answers. See the gallery, read about the rest of Wake County, or send photos of the slab.
The same person who answers the phone drives the trailer out, so the question of whether we come to you is easy to settle. Rolesville is well within the 10 counties we cover from Goldsboro. If you are a few miles beyond town, call before you assume we will not come. Town limits rarely line up with the real drive.
Questions from Rolesville customers
Is there a warranty?
Yes, and it is worth reading rather than framing. Ask when we quote and we will tell you plainly what it covers and what it does not.
How far out are you booking?
It moves with the season. Spring and fall fill first. Call and we will tell you honestly where you would land rather than telling you what you want to hear.
What if I already have a coating that is failing?
That is a normal starting point. It comes off in the grind, and what is underneath decides what the job actually is. We would rather find that on day one than after.
Do I have to coat it after grinding?
You do not. Ground and sealed concrete is a finished floor by itself, and some people want exactly that, especially in a workshop. Sealing is a service we offer on its own.
Will grinding get rid of the oil stains?
It removes the stained surface layer, which handles most of it. Oil that has soaked deep into the slab can ghost back, so heavy contamination gets a degreasing pass first and sometimes a primer.
Got a slab in Rolesville?
A couple of pictures and a rough size is all it takes to start. We will tell you what the slab needs.
The phone goes straight to Beto Ponce, the owner who pours the floors. Past jobs are in the gallery.
(919) 440-1333