Floors worth looking down at, Farmville.
Garage floors, metallic pours and flake systems for Farmville homeowners who want it done right. The owner pours it, and we are insured and bonded.
Insured and bonded · 5 years · every floor poured by the owner
Get a free quote
Photos and rough square footage get you a real number.
Resin floors for Farmville homes.
The concrete around Farmville is no different from anywhere else in the county. What differs is how long it has been left open to whatever lands on it.
We run out to Farmville from the shop in Goldsboro, about 45 minutes out. Farmville is in Pitt County, and we cover the towns around it too, including Greenville, Winterville, Ayden, Grifton.
The difference between a coating that lasts nine years and one that peels in nine months is almost never the resin. It is what happened to the concrete before the resin went down.
A floor that is still tight in ten years got that way on the first day. That is the grind: diamond tooling takes the slab down to clean, open concrete so the resin has something to bite into, and any cracks it uncovers get chased out and filled. The pour and topcoat follow, and they are the easy part.
Why slabs around here fail early.
People who call us about a floor that failed usually assume the coating was bad. Most of the time it was fine. What failed was the prep: the slab was already moving on its sandy base and opening hairline cracks, and nobody dealt with them before the coating went down, so within a year those lines came right through.
Repair work is most of what separates a floor that lasts from one that cracks through. We chase each crack into a V and fill it with a rigid repair resin, patch the pits and grind them level, and treat the control joints so they can keep moving under the finish. None of it is visible once the coating is down.
Heat matters as much as the ground does. Resin cures by chemical reaction, and a hot Farmville garage in July shortens the working window enough to change how a metallic pour is handled. We schedule around the slab temperature rather than the calendar.
What we pour in Farmville
Recent pours
Which rooms we end up in.
Most calls start in the garage, but a good share end up somewhere else in the house. Once people see what a resin floor does to a bay they start looking at the laundry room, the sunroom, the basement steps.
A kitchen in Farmville can get a whole new look without anybody pulling out a counter. The resin pours right over the tops that are already there, so the cabinets stay put and there is no waiting on a slab to be templated and cut. Countertops are a big part of what we do. Here is how a countertop pour goes.
Timing a pour around the weather.
The busy stretch runs from about March through June and then again in September and October. If you want a specific week, calling a month out is the difference between getting it and waiting.
What moves the price.
Price tracks the prep, not the resin. The material cost between a simple flake floor and a showpiece metallic pour is real but modest; the hours in the grind and the repair are what change the total.
Beto walks the slab himself before giving a price, because he is the one who will be grinding it. The number you get that day is the number you pay, start to finish. To save everyone a trip, get us a couple of photos first and we will tell you if it fits what you were expecting.
How the two days run.
If you split the job by hours, day one gets most of them. That is the grinding: diamond tooling and dust extraction take the slab down to clean concrete, and whatever cracks and pits show up underneath get chased out and filled the same day. Day two is quick by comparison. The resin goes down, then the topcoat goes over it.
Your part of the job is small. Have the space emptied out before we arrive on the first morning, since we grind every square foot of the slab. Then stay off it until the next morning, when walking on it is fine, and keep the vehicles out until day three or four. Cooler weather pushes that toward four.
Who actually pours it.
Every floor Alpha Resin puts down gets poured by the owner. There is no crew that shows up instead of the person you talked to.
Insured and bonded, 5 years of pours, and a phone the owner answers. See the gallery, read about the rest of Pitt County, or send photos of the slab.
Short answer for anyone near Farmville: yes, we come out. It sits well inside the 10 counties Alpha Resin covers from Goldsboro. The longer answer is for folks on a rural road or just past the town limits. Call and ask anyway, because what matters is drive time from Goldsboro, and that rarely follows the lines on a map.
Questions from Farmville customers
Can you match a color I have seen?
Close, and usually closer than people expect. Bring a photo. Metallic pigment moves on its own while it cures, so the floor reads as that look rather than copying it exactly.
How much dust does the grinding make?
Less than people picture. The grinder runs into a dust extractor at the tool, so it is captured where it is made. It is not zero, and we sheet off doorways, but it does not fill the house.
Do you take on small jobs?
Yes. A single-bay garage, a laundry room, a set of counters. Small work is a good share of the schedule and it is how most people try us before a bigger job.
Is there a warranty?
Yes, and it is worth reading rather than framing. Ask when we quote and we will tell you plainly what it covers and what it does not.
How far out are you booking?
It moves with the season. Spring and fall fill first. Call and we will tell you honestly where you would land rather than telling you what you want to hear.
Got a slab in Farmville?
Snap a few photos of the floor and take a guess at the square footage. That is enough for us to tell you what you are looking at.
Not ready to call? Browse the gallery first. When you do call, you talk to Beto Ponce, the owner.
(919) 440-1333