Floors worth looking down at, Teachey.
Metallic, flake and quartz systems for homes around Teachey. Insured, bonded, and poured by the owner.
Insured and bonded · 5 years · every floor poured by the owner
Get a free quote
Photos and rough square footage get you a real number.
Resin floors for Teachey homes.
We get to Teachey often enough that the trailer knows the way.
We run out to Teachey from the shop in Goldsboro, about 40 minutes out. Teachey is in Duplin County, and we cover the towns around it too, including Faison, Calypso, Warsaw, Kenansville.
A floor is the one surface in the house that gets walked on, parked on, dropped on, and then judged anyway.
The sequence is the same on every floor. Diamond grind the slab down to clean, open concrete. Chase and fill the cracks the grind exposes. Pour, then topcoat. The grind is the part that decides whether the floor is still holding in ten years, which is why we own the equipment rather than renting it by the day.
What eastern North Carolina does to a slab.
Humidity is the one that surprises people. Coastal plain slabs sit on sandy soil with a water table that moves, and a slab poured without a vapor barrier will push moisture up through itself for its whole life. That vapor has to go somewhere. If it meets a coating that cannot breathe, it collects underneath and lifts it, which is what people are describing when they say a floor bubbled or peeled in sheets.
So we test before we quote rather than after. If the slab is wet we say so and price the system that can handle it, and if it is bad enough that no coating belongs on it we will tell you that too. It is a shorter conversation than the one that happens a year after a floor fails.
The other local factor is heat. Resin cures by chemical reaction and the reaction runs faster when it is hot. A July pour in an uninsulated Teachey garage gives you less working time than the same pour in October, which matters most on metallic floors where the pattern is set while it is wet. We plan around it instead of fighting it.
What we pour in Teachey
Recent pours
Which rooms we end up in.
Garages are the bulk of it. A two-car bay is the job we quote most weeks, and the reason is usually the same: the slab has started dusting, or there is a stain by the driver's door that will not come up no matter what gets poured on it.
Countertops are the other half of the business. The resin pours over the counters that are already there, so a Teachey kitchen changes completely without a tear-out, without new cabinets, and without a week of plywood while a slab gets templated. See how countertop pours work.
Timing a pour around the weather.
Spring and fall book up first. Resin cures by chemical reaction and mild weather gives the widest working window, so those are the months everybody wants. Summer works fine as long as the pour is scheduled early in the day, and winter works as long as the slab is warm enough.
What moves the price.
Two things move the number: square footage and what shape the slab is in. A clean, sound slab is the cheap version. A slab with a failed coating on it, deep oil saturation, or cracks that have to be chased and filled costs more because the prep takes longer, and prep is most of the labor.
Which is why we come out and look. You get a number the day we walk the slab, and that number does not move once the work starts. Send a couple of photos and we will tell you whether we are in the right range before anybody drives anywhere.
How the two days run.
Day one is prep. Grinders and dust extraction come off the trailer and the slab gets taken down to clean concrete, then the cracks and pits that the grind exposes get chased out and filled. It is loud and it is dusty, and it is most of the labor in the job. Day two is the pour and the topcoat, which is the fast half.
The room has to be completely empty the morning we start, because we grind the whole slab rather than working around things. Light foot traffic is fine the next morning. Vehicles go back on at day three or four depending on how warm it is, and rushing that is the one shortcut that will mark a brand new floor.
Who actually pours it.
Beto Ponce does the pours himself. The person who quotes your floor is the person standing on it with a squeegee.
Insured and bonded, 5 years of pours, and a phone the owner answers. See the gallery, read about the rest of Duplin County, or send photos of the slab.
If you are on the edge of town or just outside it, call and ask rather than assuming. Town lines and county lines rarely match how far a trailer actually has to drive, and the answer is usually yes. Alpha Resin covers 10 counties out of Goldsboro, and Teachey sits well inside that.
Questions from Teachey customers
Can you match a color I have seen?
Close, and usually closer than people expect. Bring a photo. Metallic pigment moves on its own while it cures, so the floor reads as that look rather than copying it exactly.
How much dust does the grinding make?
Less than people picture. The grinder runs into a dust extractor at the tool, so it is captured where it is made. It is not zero, and we sheet off doorways, but it does not fill the house.
Do you take on small jobs?
Yes. A single-bay garage, a laundry room, a set of counters. Small work is a good share of the schedule and it is how most people try us before a bigger job.
Is there a warranty?
Yes, and it is worth reading rather than framing. Ask when we quote and we will tell you plainly what it covers and what it does not.
How far out are you booking?
It moves with the season. Spring and fall fill first. Call and we will tell you honestly where you would land rather than telling you what you want to hear.
Got a slab in Teachey?
Send a couple of photos and the rough square footage. We will tell you what it takes.
Call and you get Beto Ponce, not a call center. Or look through the gallery first.
(919) 440-1333